High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
A time release formula that controls unpleasant odors from algae and bacteria in evaporative coolers and neutralizes odor in cooler water to freshen the air. Not for potable (drinkable) water.
For ductless installations and mobile homes. Diffuses air 4 ways or 6 ways with 14 adjustable louvers, made with white colored, high-impact plastic. Will not rust, corrode or stain. For duct openings up to 20 in x 20 in. Grille is 22-1/2 in x 22-1/2 in x 3-1/8 in depth. Easy to install. For all residential cooler models.
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
Provides a one step treatment to inhibit build-up of scale, rust and offensive odor. Conditions cooler pad to reduce air temperature. Contains mild acid and wetting agents, not for potable water.
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
Kit fits 3-way side, 4-way down, 6-way side and 8-way down by using an 8 way down distributor with up to 5 inserts plugs and MEK. Includes distributor head, water distributor adapter, MEK solvent and instructions.
For cooler bearings and some cooler motors with oilable bearings. Lubricate shaft bearings at the start of every season and every 60 days during season. Inhibits rust and oxidation.
The open cellular structure of this excelsior allows premier pad to hold more water, this results in more evaporative wicking area per square inch than any other evaporative cooler pad. Delivered up to 7 deg cooler air than paper or synthetic pads.
Designed for use with 1/3, 1/2,3/4 and 1 hp, 1-speed and 2-speed, 115 V and 230 V cooler motors. Mounts in either a standard single 2x4 or double 4x4 gang electrical box. Unit automatically resets to 77 deg in the event of a power failure.
Premium, heavy-bodied, "one coat" coating. Apply with a brush. Designed to coat and seal evaporative cooler bottom pans, protect against rust and corrosion all season, help deaden sound. Resistant to moisture, non-asbestos and fast drying.
A time release formula that controls unpleasant odors from algae and bacteria in evaporative coolers and neutralizes odor in cooler water to freshen the air, not for potable (drinkable) water.
Premium, heavy-bodied, "one coat" coating. Apply with a brush. Designed to coat and seal evaporative cooler bottom pans, protect against rust and corrosion all season, help deaden sound. Resistant to moisture, non-asbestos and fast drying.
Everything needed to run water to an evaporative cooler. Includes: 1/4 in x 25 ft poly tube, brass sill cock with garden hose thread x 1/8 FPT tapped on side, hose washer, 1/4 cc x 1/8 MPT male union, (2) 1/4 in poly tube adapters and installation instructions. For outdoor use only.
Cellulose base impregnated with plastic resins and anti-rot agents. 50% heavier than paper, holds more water and lasts longer, with high air velocity and fast wet-out. Energy efficient, durable and easy to install.
Cellulose base impregnated with plastic resins and anti-rot agents. 50% heavier than paper, holds more water and lasts longer, with high air velocity and fast wet-out. Energy efficient, durable and easy to install.
Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles (stops and starts due to over-heating), open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must use the next size smaller pulley. Always use pulley size recommended by cooler manufacturer.
High efficiency, high-temperature insulation system. Capable of withstanding temperatures over 300 deg F. Reduces motor failures due to heat aging. Premium moisture-resistant insulation system. Styrenated epoxy coating on rotor prevents rust build-up and extends the life of the motor. 115 V, all copper windings, no base, 56Z frame. Auto-reset thermal overload protection. Great starting switch features. Heavy-duty bronze bearing. Mechanically and electrically approved for evaporative cooler applications. Label and instructions in English and Spanish. UL approved construction.
Molded 3 prong plug and extra-long grounded cord fits Champion cooler mounting bracket. Built-in supplementary pump screen, flame-retardant motor housing and auto-reset thermal overload protection. Corrosion-resistant shaft. Permalube bearings. Built-in barbed elbow. Removable base plate for ease of cleaning. Operates in water reservoirs of 1/2 to 4 in 120 VAC, 60 Hz, UL classified.
